PTFE Seated Corrosion Resistant Split Body API609 Butterfly ValvePTFE seated butterfly valve is a split body boot seated butterfly valve designed for bubble tight service o corrosive applications. The PTFE lined seat and stainless steel disc/stem provide superior corrosion resistance, but with the economy of a cast iron body. Features Rated to 150 PSIDesigned for 125/150 Lbs FlangesSplit Body for Easy MaintenanceHeavy-duty Square Groove Boot SeatLug Bodies for Dead-End Service, Rate..

Pneumatic Actuated Ductile Iron Body Resilient Seat API609 Butterfly ValveProduct Detail  Valve type Centric Disc Butterfly valve with a single piece rubber lined body Body type Short wafer (sandwiched between flanges) Seat type Integrally moulded with the body End Connection Wafer Sandwiched(Lug type on request) Pressure rating PN 10 / PN 16 (On Request) ..

NBR Liner Stainless Steel Body Concentric API609 Butterfly ValveDescription:China cast iron butterfly valves offered in Wafer style. These valves are available with Ductile Iron, Aluminum-Bronze or 316 Grade Stainless steel discs. These valves are in stock with both BUNA-N and EPDM liners. Viton liners are available upon request. The new design incorporates a one-piece stem with an important new feature. The disc is broached to fit the milled square stem with allows the disc to float, givin..

MSS SP-67 Standard EPDM Seated Center lined Butterfly ValveOverviewThe wafer type centerline butterfly valves are used in on-off block applications, with a simple disk in line with the center of the valve body. Generally, wafer type centerline butterfly valves are made from cast iron or another inexpensive metal and are lined with rubber or a polymer. The wafer body, sometimes called the flangeless body, is a flat body that has a minimal face-to-face, which is equal to twice the required wa..

Mono Flange Ductil Iron Body Concentric API609 Butterfly ValveDescription Mono Flange Butterfly Valve with Centric Disc and Bonded Liner. 100% bi-directional bubble tight shut off. Applicable for all kinds of industries, especially shipbuilding, offshore, petrochemical, heavy industry, water treatment and civil engineering. Features*Overall design generally in accordance to BS En 593 *Face to face dimension in accordance to EN 558 table I, Series 20 (Series 16 from DN700 and abo..

Lug Style Resilient Seated Concentric API609 Ductile Iron Butterfly Valve For Water Plants About Butterfly Valve Butterfly valves are classified as "quarter-turn" valves. When the metal disk that's part of the valve’s design is rotated a quarter of a turn, it opens or closes. The disk, referred to as the "butterfly" is attached to a rod. When the butterfly valve is opened all the way, the disc rotates (a 1/4 turn), allowing for a nearly unrestricted passing of the fluid. You can ..

Lug Style Resilient Seated Concentric API609 Ductile Iron Butterfly Valve For Water Plants About Butterfly Valve Butterfly valves are classified as "quarter-turn" valves. When the metal disk that's part of the valve’s design is rotated a quarter of a turn, it opens or closes. The disk, referred to as the "butterfly" is attached to a rod. When the butterfly valve is opened all the way, the disc rotates (a 1/4 turn), allowing for a nearly unrestricted passing of the fluid. You can ..

Gear Operatin Cast Iron JIS 10K Drilled API609 Butterfly ValveIntroduction DN100 to DN 1200, Face to face after EN558-1/13, compatible with flange PN10 or PN16, top flange after ISO 5211, with hand lever from DN200 with Worm Gear. Our resilient butterfly valve are reliable, maintenance-free shutoff and control valve s with gas tight seal. It can be used as a leak-free and corrosion resistant in various applications under demanding operating conditions. For a butterfly valve, only ..

Full Lug Type 2 Pieces Stem SS Disc API609 Butterfly ValveFull lug body cast iron butterfly valve, in stainless steel disc, with two piece stem design, for wide applications such as water, wastewater, gas air, Bi-directional seal bubble tight shutoff, with 10 position lock handle for throttling. Design BenefitsWafer /lug body available.Rated pressure 200 psi for size 2”-12”; 150 psi for 14”-16”Buna Seat up to 80 ℃; EPDM up to 100℃.Stainless steel stemDisc: ductile iron-nickel plated; a..

Fire Protection Grooved End API609 Butterfly ValveQuick Review Body Construction: Grooved End Face to face: MSS SP-67Groove acc.to: AWWA C606Top flange: EN ISO5211Max Working pressure: PN16Temperature: -20℃ to 140 ℃Operation: Lever, Hand wheel, Electric Actuator, Pneumatic ActuatorCoating: Epoxy CoatingDisc: Bronze / Ductile iron rubber volcanized EPDM/NBR/Hypalon/ButylTightness test: To EN12266-1:2003 Material Construction  Item  Description ..

Electric Actuated Cast Iron Concenic API609 Butterfly Valve Description The resilient seated butterfly valve is a general purpose valve with an phenolic-back rubber seat, offering a long life with low maintenance, self-lubricating bearings ensures perfect guiding and turning of the shaft without seizure or premature wear. All valves are 100% hydraulic tested upon API 598. Product FeaturesQualified for both gaseous and liquid servicePositive shut-off bi-directionallyPhenolic b..

Centerlined CF8M Disc SS Shaft API609 Butterfly ValveIntroductionWe offer a full range of Wafer type Butterfly valve up to DN1400, in a range of materials such as Cast Iron, Ductile Iron and carbon steel, alongside CF8 Stainless AND CF8M Austenitic with Aluminum Bronze and C95500 Nickel Aluminum Bronze variants in Wafer/Lugged type and double flanged variants. Wafer Type Butterfly Valve - Through Shaft Double Half Shaft Polished Edge Disc_500x500 Discs are included in the range in..

BS EN593 Cast Iron Semi Lug Type Worm Gear API609 Butterfly ValveCompact in design and slim in profile butterfly valves offer a low weight easy to operate lever handle valve solution in sizes DN65 to DN200 and hand wheel gear operation in DN250 and DN1200 sizes. The range is offered in both fully lugged and wafer semi lugged options l  PN16 Rated l  Stainless steel disc and stems as standrd l  Lever and gear optionsl  DN65 to DN300 standard size range  Below..

Bi-directional Bubble Tight Double Flange Soft Seal Butterfly Valve With Gear ActuatorQuick Info:Flanges: UNI EN 1092-2 PN 10 - 16, ANSI #150 Design: API 609 Face to face length: API609 Installation: horizontal / vertical APPLICATIONS • Water supply • Waste water treatment plants • Fire fighting systems • Power plants • Industry • Drinking water • Irrigation • Heating – conditioning systems • * other versions available for different applications (please contact us)  Material ..

Description Wafer butterfly valve with epoxy-coated ductile iron body are designed to control various media in a commercial and industrial application. Valve mounts between two standard ANSI/ASME Class 125/150 flanges. Seat to flange sea, eliminates the need for flange gaskets. Disc is precision machined 316SS for maximum corrosion resistance. Two piece stem and disc design enhance the flow capacity and reduces turbulence.  Features ISO5211 top mounting for manual, air or ele..